Skip to main content

Electronics I · Small-signal models and gain

Design an NPN voltage-divider CE bias network supplied from V_(CC)=15.0 V

Problem

Electronics I practice problem

Design an NPN voltage-divider CE bias network supplied from VCC=15.0 VV_{CC}=15.0\,\mathrm{V}. The emitter resistor RER_E goes to ground, the collector resistor RCR_C goes to VCCV_{CC}, and the divider is R1R_1 from VCCV_{CC} to base and R2R_2 from base to ground. Use the forward-active model VBE=0.700 VV_{BE}=0.700\,\mathrm{V}, IC=βFIBI_C=\beta_F I_B, IE=(βF+1)IBI_E=(\beta_F+1)I_B, and ignore Early effect and leakage.

Nominal targets at βF=100\beta_F=100 are IC=2.00 mAI_C=2.00\,\mathrm{mA}, VCE=7.00 VV_{CE}=7.00\,\mathrm{V}, and VE=2.50 VV_E=2.50\,\mathrm{V}. Additional constraints, all at this same βF=100\beta_F=100:

• the Thevenin resistance of the divider must satisfy RTH=R1∥R2≤0.100 (βF+1)RER_{TH}=R_1\parallel R_2\le 0.100\,(\beta_F+1)R_E;
• the unloaded divider current Idiv=VCC/(R1+R2)I_{\mathrm{div}}=V_{CC}/(R_1+R_2) must be at least 10.0 IB10.0\,I_B;
• every resistance must be positive.

(a) Compute the unique RER_E and RCR_C that meet the nominal ICI_C, VCEV_{CE}, and VEV_E. Compute IBI_B, IEI_E, VBV_B, and VCV_C.

(b) Among all divider pairs meeting both the RTHR_{TH} inequality and the IdivI_{\mathrm{div}} inequality with equality in whichever bound is the more restrictive, compute R1R_1, R2R_2, RTHR_{TH}, VTHV_{TH}, and IdivI_{\mathrm{div}}. (If both inequalities can be met simultaneously with equality in one and slack in the other, enforce the tighter bound and verify the other.)

(c) Holding the four resistances of (a)–(b) fixed, recompute the Q-point at βF=60.0\beta_F=60.0 and at βF=180\beta_F=180. Report both collector currents, both VCEV_{CE} values, and confirm forward-active operation (VC>VBV_C>V_B and VCE>0.200 VV_{CE}>0.200\,\mathrm{V}) at both extremes.

Hint

Hint

RER_E and RCR_C are fixed by the three nominal voltages/current independently of the divider.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Electronics I sample problem: Try the free sample problem.

More Electronics I practice problems

Back to Electronics I

An original ProofAnvil practice problem, written for this course. ProofAnvil is a practice course, not a homework-answer service.