Circuits II · Resonance and passive filter design
Two coils of L₁=16.0 mH and L₂=9.00 mH, with M=6.00 mH, are connected in parallel…
Problem
Circuits II practice problemTwo coils of and , with , are connected in parallel between nodes and . Coil 1 joins to with its dotted terminal at . Coil 2 also joins to . An independent current source , with in seconds, is injected into node from node , so that the source voltage is the voltage of with respect to . No other elements are present. Determine (a) the coupling coefficient . For connection P the dotted terminal of coil 2 is also at (parallel-aiding). Determine (b) the equivalent inductance seen by the current source, the peak phasor of with respect to , and . For connection Q the dotted terminal of coil 2 is moved to (parallel-opposing). Determine (c) , the corresponding peak phasor , and . Then (d) compute the stored magnetic energy at an instant when in each connection, using coil currents consistent with the common voltage , and confirm that both energies equal .
Hint
HintParallel coils share one voltage; aiding versus opposing changes how appears in the denominator of .
Check your work
Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.
The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Circuits II sample problem: Try the free sample problem.
More Circuits II practice problems
- A capacitor C=8.0 μF is connected between nodes p and n, with capacitor voltage…Circuit application of Laplace transforms and switching
- The circuit has a reference node 0 and node aCircuit application of Laplace transforms and switching
- A single loop contains, in series, an independent DC voltage source v_s=30.0 V…Circuit transfer functions, poles, zeros, and Bode synthesis
- A network has reference node 0 and two further nodes 1 and 2Circuit transfer functions, poles, zeros, and Bode synthesis
- An independent current source i_s injects into node a from the reference node 0Resonance and passive filter design
- An ideal operational amplifier is supplied from ±12.0 V and saturates at those railsTwo-port networks and interconnection
- An ideal operational amplifier supplied from ±12.0 V (saturation at the rails) is…Two-port networks and interconnection
- A series loop is driven by an independent voltage source v_s whose negative terminal is…Circuit state-space models
- Four linear two-ports are specified by parameter matricesCircuit state-space models