Circuits II · Circuit application of Laplace transforms and switching
The circuit has a reference node 0 and node a
Problem
Circuits II practice problemThe circuit has a reference node 0 and node . An independent DC voltage source of is connected from 0 to node with its positive terminal at . Resistor joins to . A capacitor is connected from to 0, with polarised positive at . An ideal voltage-controlled current source of value with is connected from to 0, with the source arrow pointing towards 0, so that the dependent current leaves node . The controlling voltage is . For a switch in series with the independent source has been open, and . At the switch closes and remains closed.
(a) For , replace the capacitor by an open circuit and determine . Deactivate the independent source (replace it by a short circuit) and determine the equivalent resistance seen by the capacitor, treating the dependent source as a conductance . Determine the time constant.
(b) Determine by continuity and write for .
(c) Write the current in directed from to and the dependent-source current in its assigned direction, both for . Write the capacitor current under the passive sign convention and confirm KCL at node for .
Hint
HintThe VCCS is linearly controlled by itself, so it acts as a conductance in parallel with .
Check your work
Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.
Create a free account to check your answer and see the solution. Create a free account.
More Circuits II practice problems
- A capacitor C=8.0 μF is connected between nodes p and n, with capacitor voltage…Circuit application of Laplace transforms and switching
- A single loop contains, in series, an independent DC voltage source v_s=30.0 V…Circuit transfer functions, poles, zeros, and Bode synthesis
- A network has reference node 0 and two further nodes 1 and 2Circuit transfer functions, poles, zeros, and Bode synthesis
- An independent current source i_s injects into node a from the reference node 0Resonance and passive filter design
- Two coils of L₁=16.0 mH and L₂=9.00 mH, with M=6.00 mH, are connected in parallel…Resonance and passive filter design
- An ideal operational amplifier is supplied from ±12.0 V and saturates at those railsTwo-port networks and interconnection
- An ideal operational amplifier supplied from ±12.0 V (saturation at the rails) is…Two-port networks and interconnection
- A series loop is driven by an independent voltage source v_s whose negative terminal is…Circuit state-space models
- Four linear two-ports are specified by parameter matricesCircuit state-space models