Skip to main content

Circuits II · Two-port networks and interconnection

An ideal operational amplifier is supplied from ±12.0 V and saturates at those rails

Problem

Circuits II practice problem

An ideal operational amplifier is supplied from ±12.0 V\pm 12.0\,\mathrm{V} and saturates at those rails. In the linear region the input currents are zero and v+=v−v_+=v_-. The independent source vinv_{\mathrm{in}} is connected directly to the noninverting input. Resistor Rg=5.00 kΩR_g=5.00\,\mathrm{k}\Omega is connected between the inverting input and ground. Resistor Rf=20.0 kΩR_f=20.0\,\mathrm{k}\Omega is connected between the output and the inverting input. No separate load is attached. Practical constraint: the linear relation may be used only while ∣vo∣|v_o| is strictly less than 12.0 V12.0\,\mathrm{V}.

(a) Determine the closed-loop voltage gain vo/vinv_o/v_{\mathrm{in}} that applies in the linear region.
(b) Determine the closed interval of vinv_{\mathrm{in}} for which the amplifier remains linear.
(c) For vin=2.00 Vv_{\mathrm{in}}=2.00\,\mathrm{V}, determine vov_o and v−v_-, and state whether v+=v−v_+=v_-.
(d) For vin=2.80 Vv_{\mathrm{in}}=2.80\,\mathrm{V}, determine the actual output voltage after the rails are enforced, determine v−v_- from the resistor divider attached to that output, and state whether a virtual short exists between the input terminals.

Hint

Hint

Noninverting gain is 1+Rf/Rg1+R_f/R_g only while the output is strictly inside the rails.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Circuits II sample problem: Try the free sample problem.

More Circuits II practice problems

Back to Circuits II

An original ProofAnvil practice problem, written for this course. ProofAnvil is a practice course, not a homework-answer service.