Circuits II · Circuit transfer functions, poles, zeros, and Bode synthesis
A single loop contains, in series, an independent DC voltage source v_s=30.0 V…
Problem
Circuits II practice problemA single loop contains, in series, an independent DC voltage source (positive terminal at node ), a resistor from to node , an inductor from to node , and a capacitor from to the reference node (the negative source terminal is at ). A switch is connected directly across the capacitor, from to . The loop current leaves the positive source terminal, passes through and , and, when the switch is open, enters the capacitor terminal marked positive for (positive of at ). For the switch is closed, short-circuiting the capacitor, and DC steady state exists. At the switch opens and remains open, so that for the circuit is the driven series combination of , , , and . Determine , , , the current through the closed switch at (positive from to ), and the capacitor current . Then determine , , , at , from KVL, and at . State which variables are continuous and which jump. For determine , , , the characteristic roots, and the damping classification, then determine the complete responses and .
Hint
HintA closed switch across the capacitor clamps for all , so the DC loop is just and .
Check your work
Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.
The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Circuits II sample problem: Try the free sample problem.
More Circuits II practice problems
- A capacitor C=8.0 μF is connected between nodes p and n, with capacitor voltage…Circuit application of Laplace transforms and switching
- The circuit has a reference node 0 and node aCircuit application of Laplace transforms and switching
- A network has reference node 0 and two further nodes 1 and 2Circuit transfer functions, poles, zeros, and Bode synthesis
- An independent current source i_s injects into node a from the reference node 0Resonance and passive filter design
- Two coils of L₁=16.0 mH and L₂=9.00 mH, with M=6.00 mH, are connected in parallel…Resonance and passive filter design
- An ideal operational amplifier is supplied from ±12.0 V and saturates at those railsTwo-port networks and interconnection
- An ideal operational amplifier supplied from ±12.0 V (saturation at the rails) is…Two-port networks and interconnection
- A series loop is driven by an independent voltage source v_s whose negative terminal is…Circuit state-space models
- Four linear two-ports are specified by parameter matricesCircuit state-space models