Skip to main content

Circuits I · Ideal operational-amplifier circuits

A linear one-port has terminals t and the reference node (ground)

Problem

Circuits I practice problem

A linear one-port has terminals tt and the reference node (ground). Inside the one-port, an independent voltage source of 20.0 V20.0\,\mathrm{V} has its positive terminal at node aa and its negative terminal at ground; a 5.00 Ω5.00\,\Omega resistor connects aa to node bb; a 10.0 Ω10.0\,\Omega resistor connects bb to ground; and a 4.00 Ω4.00\,\Omega resistor connects bb to tt. A voltage-controlled current source of transconductance 0.200 S0.200\,\mathrm{S} is directed from ground to tt; its controlling voltage is vbv_b (bb with respect to ground), so the controlled current is 0.200vb0.200 v_b. The controlled source remains active throughout. With the port open, determine Vth=vtV_\mathrm{th}=v_t. With tt connected to ground by an external short, define IscI_\mathrm{sc} as the current directed from tt through that short to ground and determine IscI_\mathrm{sc}. Then determine Rth=Vth/IscR_\mathrm{th}=V_\mathrm{th}/I_\mathrm{sc}.

Hint

Hint

The dependent source stays on; RthR_\mathrm{th} is defined by the ratio of the two port measurements, not by resistor reduction with the independent source killed.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership.

More Circuits I practice problems

Back to Circuits I

An original ProofAnvil practice problem, written for this course. ProofAnvil is a practice course, not a homework-answer service.