Circuits I · Voltage, current, power, and resistive networks
A connected resistive network has three essential nodes labelled A, B, and N
Problem
Circuits I practice problemA connected resistive network has three essential nodes labelled , , and . Take as the reference (ground) node, and let and be the voltages of and with respect to . The branches are as follows:
• a resistor between and ;
• a resistor between and ;
• a resistor between and ;
• an independent current source of connected between and , with its reference arrow directed from toward ;
• an independent current source of connected between and , with its reference arrow directed from toward .
Using systematic nodal analysis, write the two independent KCL equations in conductance matrix form . State every entry of in siemens and every entry of in amperes, with the unknown vector ordered as . Solve for and in volts. Then compute the current through the resistor between and , taken positive from toward .
Hint
HintChange every resistance into a conductance and treat each current-source arrow as an injection into the node it points toward.
Check your work
Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.
Create a free account to check your answer and see the solution. Create a free account.
More Circuits I practice problems
- A charge q=50 μC is moved slowly from node n to node pVoltage, current, power, and resistive networks
- A network has essential nodes A, B, C, and reference node NNode, mesh, superposition, and equivalent circuits
- A connected planar circuit occupies two adjacent rectangular windows whose shared…Node, mesh, superposition, and equivalent circuits
- A linear one-port has terminals t and the reference node (ground)Ideal operational-amplifier circuits
- An ideal operational amplifier with supplies ±15.0 V (saturation at the rails) is…Ideal operational-amplifier circuits
- Capacitors C₁=20 μF and C₂=30 μF are connected in seriesCapacitors, inductors, and first-order transients
- A 40 μF capacitor is connected, for all t<0 and for a duration sufficient to reach DC…Capacitors, inductors, and first-order transients
- A source-free parallel circuit consists of R = 8 Ω, L = 2 H, and C = 1/32 FSecond-order natural and step responses
- A three-phase source is balanced and positive-sequencePhasors, sinusoidal steady state, and AC power