Skip to main content

Circuits I · Node, mesh, superposition, and equivalent circuits

A connected planar circuit occupies two adjacent rectangular windows whose shared…

Problem

Circuits I practice problem

A connected planar circuit occupies two adjacent rectangular windows whose shared vertical branch is a voltage-controlled voltage source. The bottom rail is ground. Label the top-left node AA, the top of the shared source BB, and the top-right node CC.

The branches are as follows:
• an independent 12 V12\,\mathrm{V} voltage source from ground to AA, with the positive terminal at AA;
• a 3 Ω3\,\Omega resistor from AA to BB;
• a voltage-controlled voltage source occupying the entire shared vertical from ground to BB, with the positive terminal at BB and value 0.5vx0.5 v_x, where vxv_x is the voltage across the 3 Ω3\,\Omega resistor with positive polarity at AA (so vx=vA−vBv_x=v_A-v_B). The voltage gain is the dimensionless factor 0.50.5;
• a 6 Ω6\,\Omega resistor from BB to CC;
• a 2 Ω2\,\Omega resistor from CC to ground.

Take clockwise mesh current I1I_1 in the left window and clockwise mesh current I2I_2 in the right window. The current through the controlled source, directed downward, is I1−I2I_1-I_2.

(a) Express vxv_x in terms of mesh currents, and write the two mesh-current KVL equations.
(b) Solve for I1I_1 and I2I_2.
(c) Determine vBv_B and the current leaving the positive terminal of the controlled source.

Hint

Hint

A shared voltage source — here a VCVS — does not create a supermesh; write KVL in each window.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership.

More Circuits I practice problems

Back to Circuits I

An original ProofAnvil practice problem, written for this course. ProofAnvil is a practice course, not a homework-answer service.