Skip to main content

Power Electronics and Energy Systems · Nonisolated DC-DC conversion in continuous and discontinuous modes

A lossless synchronous buck (complementary high-side and low-side switches, no diode…

Problem

Power Electronics and Energy Systems practice problem

A lossless synchronous buck (complementary high-side and low-side switches, no diode reverse recovery) is fed from Vin=48 VV_{\mathrm{in}}=48\,\mathrm{V} and switched at fs=100 kHzf_s=100\,\mathrm{kHz} with fixed duty D=0.25D=0.25. The filter is L=100 μHL=100\,\mu\mathrm{H} and C=100 μFC=100\,\mu\mathrm{F} with negligible capacitor ESR. The load is R=3 ΩR=3\,\Omega. Assume continuous conduction and a triangular inductor current.

1. Prove the dc conversionVo=DVin=12 V,Io=Vo/R=4 A,Ts=10 μs,P=VoIo=48 W.V_o=D V_{\mathrm{in}}=12\,\mathrm{V},\qquad I_o=V_o/R=4\,\mathrm{A},\qquad T_s=10\,\mu\mathrm{s},\qquad P=V_o I_o=48\,\mathrm{W}.2. Prove the peak-to-peak inductor currentΔIL=(Vin−Vo)DTsL=0.90 A\Delta I_L=\frac{(V_{\mathrm{in}}-V_o)D T_s}{L}=0.90\,\mathrm{A}and the extrema IL,min⁡=3.55 AI_{L,\min}=3.55\,\mathrm{A}, IL,max⁡=4.45 AI_{L,\max}=4.45\,\mathrm{A}. Confirm CCM by IL,min⁡>0I_{L,\min}>0.

3. With ESR-free CC, the capacitor absorbs the ac triangle of iLi_L.
ProveΔVo=ΔIL8fsC=11.25 mVpp\Delta V_o=\frac{\Delta I_L}{8 f_s C}=11.25\,\mathrm{mV}_{\mathrm{pp}}and that the average input current (high-side average) is
Iin,avg=DIo=1 AI_{\mathrm{in,avg}}=D I_o=1\,\mathrm{A}.

4. Audit both sentences: (i) “the assigned work is a hard-switching
conduction / transition / recovery loss ledger, so the numbers to report are I2RI^2R and CV2CV^2 energies rather than ΔIL\Delta I_L and ΔVo\Delta V_o”; (ii) “the ESR-free output ripple is the boost formula IoD/(fsC)I_o D/(f_s C), or else ΔVo=ΔIL⋅ESR\Delta V_o=\Delta I_L\cdot\mathrm{ESR} with a fabricated ESR.”

Do not replace the calculation by a boost DCM gain or CCM–DCM boundary, by transformer reset or flux walk, by a PFC harmonic/THD audit, by three-phase SVPWM sector dwell, or by constant-power negative-impedance stability.

Hint

Hint

D=1/4D=1/4 of 48 V48\,\mathrm{V} is 12 V12\,\mathrm{V}. Then Io=12/3=4 AI_o=12/3=4\,\mathrm{A} and Ts=1/105=10 μsT_s=1/10^5=10\,\mu\mathrm{s}.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

Create a free account to check your answer and see the solution. Create a free account.

More Power Electronics and Energy Systems practice problems