Skip to main content

Control Systems · State-space, controllability, and observability

Two lumped thermal masses exchange heat by conduction and lose heat to a constant ambient

Problem

Control Systems practice problem

Two lumped thermal masses exchange heat by conduction and lose heat to a constant ambient. Mass 1 has capacitance C1=2.00×103 J K−1C_1=2.00\times 10^3\,\mathrm{J\,K^{-1}} and temperature T1T_1 (kelvin). Mass 2 has capacitance C2=8.00×102 J K−1C_2=8.00\times 10^2\,\mathrm{J\,K^{-1}} and temperature T2T_2. The conduction path between the masses is a linear thermal resistance R12=0.0500 K W−1R_{12}=0.0500\,\mathrm{K\,W^{-1}}, with heat flow (T1−T2)/R12(T_1-T_2)/R_{12} positive from 1 to 2. Mass 2 loses heat (T2−Ta)/R2a(T_2-T_a)/R_{2a} to a large ambient at constant TaT_a, where R2a=0.100 K W−1R_{2a}=0.100\,\mathrm{K\,W^{-1}}. An electrical heater supplies a heat rate u(t)u(t) (watts) into mass 1 only. Mass 1 has no direct ambient path. Energy balances are CiT˙i=C_i\dot T_i=net heat into mass ii. Radiation, spatial gradients, and temperature dependence of the resistances are neglected.

(a) Write the energy balances in the absolute temperatures T1,T2T_1,T_2. Identify every constant-equilibrium pair (T1∗,T2∗)(T_{1*},T_{2*}) corresponding to a constant heater power u∗u_* and the given constant TaT_a.

(b) Define deviation variables δT1=T1−Ta\delta T_1=T_1-T_a, δT2=T2−Ta\delta T_2=T_2-T_a, and keep uu as the input (the heater bias is not subtracted). Show that the deviation system is linear and unforced by TaT_a. Report the state-space matrices for x=(δT1,δT2)T\mathbf{x}=(\delta T_1,\delta T_2)^\mathrm{T}, input uu, and output y=δT2y=\delta T_2, with units.

(c) Compute the monic characteristic polynomial and the eigenvalues. Compute the zero-state transfer function H(s)=Y(s)/U(s)H(s)=Y(s)/U(s) as a ratio of coprime real polynomials with monic denominator, and state its units.

(d) For u∗=40.0 Wu_*=40.0\,\mathrm{W} and Ta=293.15 KT_a=293.15\,\mathrm{K}, compute the unique equilibrium (T1∗,T2∗)(T_{1*},T_{2*}) in kelvin. Confirm that δT2∗=H(0) u∗\delta T_{2*}=H(0)\,u_*.

Hint

Hint

** Energy in each mass changes by net heat; the ambient appears only in mass 2's loss term. Measuring temperatures above ambient cancels TaT_a identically because the conduction laws are linear.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Control Systems sample problem: Try the free sample problem.

More Control Systems practice problems

Back to Control Systems

An original ProofAnvil practice problem, written for this course. ProofAnvil is a practice course, not a homework-answer service.