Chemical Reaction Engineering · Energy coupling, multiplicity, and thermal stability
An irreversible first-order reaction is carried out in an adiabatic plug-flow reactor…
Problem
Chemical Reaction Engineering practice problemAn irreversible first-order reaction is carried out in an adiabatic plug-flow reactor at constant density. The inlet temperature and the assigned adiabatic coupling are(equivalently the adiabatic rise parameter is ). The rate constant is the declared linear lawnot an Arrhenius factor. The inlet volumetric flow is . With constant density the design equation is1. Eliminate and show that2. At the design conversion , evaluate , the outlet temperature , and the required volume .
3. Report both as an exact multiple of and as the decimal (six digits after the point).
4. Audit the claims (i) that must be replaced by an Arrhenius factor or by an isothermal , and (ii) that the integral is or (a constant-volume second-order batch law or an isothermal first-order PFR law).
Do not substitute Arrhenius kinetics, and do not treat the reactor as a CSTR or as a cooled batch.
Hint
HintSubstitute into and separate variables to get .
Check your work
Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.
The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Chemical Reaction Engineering sample problem: Try the free sample problem.
More Chemical Reaction Engineering practice problems
- A constant-density liquid PFR is placed in a recycle loop of ratio R=1Batch, CSTR, and PFR design equations
- A constant-density liquid flows through two equal, isothermal, perfectly mixed tanks in…Residence-time distributions and nonideal reactors