Skip to main content

Chemical Reaction Engineering · Batch, CSTR, and PFR design equations

A constant-density liquid PFR is placed in a recycle loop of ratio R=1

Problem

Chemical Reaction Engineering practice problem

A constant-density liquid PFR is placed in a recycle loop of ratio R=1R=1. The kinetics are irreversible first-order withk=0.5 min−1.k=0.5\,\mathrm{min^{-1}}.Fresh feed and reactor volume arev0=4 L min−1,C0=3 mol L−1,V=16ln⁡2 L.v_0=4\,\mathrm{L\,min^{-1}},\qquad C_0=3\,\mathrm{mol\,L^{-1}},\qquad V=16\ln 2\,\mathrm{L}.The loop mixer is perfect. Recycle is taken from the PFR exit and returned to the mixer; the product stream leaving the splitter has the PFR exit concentration CoutC_{\mathrm{out}}.

1. Show that the single-pass remaining fraction q=Cout/Cinq=C_{\mathrm{out}}/C_{\mathrm{in}} equals 1/21/2.
2. Close the mixer Cin=(C0+RCout)/(1+R)C_{\mathrm{in}}=(C_0+R C_{\mathrm{out}})/(1+R) together with Cout=qCinC_{\mathrm{out}}=q C_{\mathrm{in}}, and compute CinC_{\mathrm{in}}, CoutC_{\mathrm{out}}, and the overall conversion X=1−Cout/C0X=1-C_{\mathrm{out}}/C_0.
3. Show that the fresh-feed molar removal v0(C0−Cout)v_0(C_0-C_{\mathrm{out}}) equals 8 mol min−18\,\mathrm{mol\,min^{-1}}, and that this equals the reactor drop v0(1+R)(Cin−Cout)v_0(1+R)(C_{\mathrm{in}}-C_{\mathrm{out}}).
4. Audit the claims (i) that the PFR may be sized on the fresh flow v0v_0 alone so that q=e−kV/v0q=e^{-kV/v_0}, and (ii) that the overall conversion equals the single-pass conversion 1−q=1/21-q=1/2.

Do not drop the mixer, and do not replace the recycle PFR by a single-pass PFR or a CSTR.

Hint

Hint

Reactor flow is 4⋅2=84\cdot 2=8. Then kτ=0.5⋅(16ln⁡2)/8=ln⁡2k\tau=0.5\cdot(16\ln 2)/8=\ln 2, so q=e−ln⁡2=1/2q=e^{-\ln 2}=1/2.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Chemical Reaction Engineering sample problem: Try the free sample problem.

More Chemical Reaction Engineering practice problems