Skip to main content

Engineering Statics · Dry friction and impending motion

A pushed block tips before it exhausts static friction

Problem

Engineering Statics practice problem

A uniform rectangular block of weight W=1000 NW=1000\ \mathrm N rests on a rough horizontal floor. Its base width in the push direction is b=0.60 mb=0.60\ \mathrm m, and its height is a=0.80 ma=0.80\ \mathrm m. A horizontal force PP is applied to the right at the top edge. The coefficient of static friction is μs=0.40\mu_s=0.40. Treat the contact pressure as a compressive resultant normal force N≥0N\ge0 whose line of action may shift within the base. For P>0P>0, let F≥0F\ge0 denote the magnitude of the floor friction acting to the left on the block, and let xN>0x_N>0 denote a rightward shift of the normal resultant from the base center.

1. Assuming full contact, determine the force PslideP_{slide} at which sliding would become impending.
2. Determine the force PtipP_{tip} at which the normal resultant reaches the right edge of the base. Which event occurs first as PP grows quasistatically?
3. At P=300 NP=300\ \mathrm N, find FF, NN, and the horizontal shift xNx_N of the normal resultant from the base center. Verify both the friction inequality and ∣xN∣<b/2|x_N|<b/2.
4. Find the value of μs\mu_s for which sliding and tipping would begin simultaneously. Explain why a calculation beyond the first threshold cannot keep assuming the same full-contact static model.

Take counterclockwise moments as positive. This is a finite-contact block problem, not a ladder-contact problem.

Hint

Hint

Solve force balance without setting friction equal to its maximum until the sliding threshold is requested.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Engineering Statics sample problem: Try the free sample problem.

More Engineering Statics practice problems

Back to Engineering Statics

An original ProofAnvil practice problem, written for this course. ProofAnvil is a practice course, not a homework-answer service.