Signals and Systems · Sampling, aliasing, and reconstruction
Time t is in seconds and s is in s⁻¹
Problem
Signals and Systems practice problemTime is in seconds and is in . All systems in this problem are causal, with ROC the open half-plane to the right of the rightmost pole. Let for and for . Define the three rational transfer functions(a) Locate the finite poles and finite zeros of each of the three functions. Classify each system as minimum-phase or non-minimum-phase according to whether every finite zero lies in the open left half-plane. Determine whether each system is BIBO stable.
(b) Form the product and compare the product with . For , compute and determine the relation between and . Evaluate each of the three magnitudes at and at .
(c) Invert to obtain its impulse response . (Polynomial division is required.) Evaluate from the ordinary part on and identify any impulsive term at . Compute in radians in .
Hint
HintMinimum-phase means every finite zero (and, for a causal stable system, every pole) lies in the open left half-plane. An all-pass factor can move a zero from the left half-plane to its mirror image.
Check your work
Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.
The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Signals and Systems sample problem: Try the free sample problem.
More Signals and Systems practice problems
- Throughout this problem, t ∈ ℝ is measured in secondsSignal spaces and LTI systems
- Continuous-time time scaling x(t/2) is defined for every real t whenever x is defined on ℝSignal spaces and LTI systems
- Let u[n]=1 for n ≥ 0 and u[n]=0 for n<0Signal spaces and LTI systems
- Continuous-time signals are real functions of t ∈ ℝ with t in seconds, and…Continuous and discrete convolution
- Continuous-time systems act on real functions of t ∈ ℝ with t in seconds, and…Continuous and discrete convolution
- A rectangular voltage pulse of height 9.00 V and width τ=0.200 ms, centered at the…Fourier series and transforms
- Sampling is x[n]=x_c(nT_s) with f_s=1/T_s=8000 Hz and t in secondsLaplace and z transforms
- Use the bilateral Laplace transform with absolute-convergence ROCLaplace and z transforms
- Stable eigenvalues can amplify the state before every mode decaysState-space systems, causality, and stability