Skip to main content

Semiconductor Device Physics · Drift, diffusion, recombination, and Poisson coupling

A linear transmission-line (TLM) test structure has contact width W=100 μm

Problem

Semiconductor Device Physics practice problem

A linear transmission-line (TLM) test structure has contact width W=100 μmW=100\,\mu\mathrm{m}. Two identical contacts separated by L=10 μmL=10\,\mu\mathrm{m} measure R=30 ΩR=30\,\Omega; the same contacts separated by L=50 μmL=50\,\mu\mathrm{m} measure R=70 ΩR=70\,\Omega. Adopt the one-dimensional TLM modelR(L)=RshW L+2RcR(L)=\frac{R_{\mathrm{sh}}}{W}\,L+2R_cwith uniform sheet resistance, identical contacts, and no current crowding beyond the transfer-length descriptionLT=RcWRsh,ρc=LT2Rsh.L_T=\frac{R_c W}{R_{\mathrm{sh}}},\qquad \rho_c=L_T^2 R_{\mathrm{sh}}.1. Prove that the slope of RR versus LL isdRdL=10000 Ω/cm\frac{dR}{dL}=10000\,\Omega/\mathrm{cm}and therefore Rsh=100 Ω/□R_{\mathrm{sh}}=100\,\Omega/\square.

2. Prove that the L=0L=0 intercept is 20 Ω20\,\Omega, so each contact
contributes Rc=10 ΩR_c=10\,\Omega. ExtractLT=10 μm,ρc=1×10−4 Ω⋅cm2.L_T=10\,\mu\mathrm{m},\qquad \rho_c=1\times 10^{-4}\,\Omega\cdot\mathrm{cm}^2.3. Predict the TLM resistance at L=30 μmL=30\,\mu\mathrm{m} and prove
R(30 μm)=50 ΩR(30\,\mu\mathrm{m})=50\,\Omega.

4. Audit both sentences: (i) “the intercept is a single RcR_c, so
Rc=20 ΩR_c=20\,\Omega and LT=20 μmL_T=20\,\mu\mathrm{m}”; (ii) “RshR_{\mathrm{sh}} equals the raw slope dR/dLdR/dL with no factor of WW, or ρc=Rc⋅W⋅L\rho_c=R_c\cdot W\cdot L without LTL_T.”

Do not replace the TLM extraction by a MOS threshold or a PN depletion width, and do not invoke a short-channel scaling limit.

Hint

Hint

The slope is 40 Ω40\,\Omega over 40 μm40\,\mu\mathrm{m}, i.e. 1 Ω/μm=104 Ω/cm1\,\Omega/\mu\mathrm{m}=10^{4}\,\Omega/\mathrm{cm}. Multiply by W=100 μm=0.01 cmW=100\,\mu\mathrm{m}=0.01\,\mathrm{cm}.

Check your work

Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.

The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Semiconductor Device Physics sample problem: Try the free sample problem.

More Semiconductor Device Physics practice problems