Heat Transfer · Steady conduction and thermal resistance
A 1.00 m² contact joint between two metal blocks has a measured temperature drop of 8.5…
Problem
Heat Transfer practice problemA 1.00 m² contact joint between two metal blocks has a measured temperature drop of 8.5 °C when the heat transfer rate is 340 W. Determine the thermal contact resistance of the joint in K/W and in m²·K/W.
Hint
HintContact resistance is the observed interface divided by .
Check your work
Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.
Create a free account to check your answer and see the solution. Create a free account.
More Heat Transfer practice problems
- A 12 mm thick copper plate (k = 401 W/m·K) has uniform face temperatures of 85 °C and…Steady conduction and thermal resistance
- Superheated steam at 250 °C with hᵢ = 200 W/m²·K flows inside a carbon-steel pipe (k =…Fins and transient conduction
- An annular aluminum fin of uniform thickness 1.5 mm, inner (base) radius 12 mm, and…Fins and transient conduction
- An orange, modeled as a sphere of diameter 80 mm, is taken from storage at 4 °C and…External and internal convection
- Atmospheric air at Ti = 20 °C enters an aligned tube bank with 8 rows of tubes in the…External and internal convection
- Turbulent water flow (Re_D = 4.6 × 10⁴, Pr = 5.4) enters a 20 mm i.dThermal radiation and enclosure exchange
- Refrigerant vapor is condensed on the outside of a 19 mm o.dThermal radiation and enclosure exchange
- A single horizontal condenser tube of outer diameter D = 25 mm and length L = 2.40 m…Heat exchangers and effectiveness methods
- A one-dimensional steady conduction problem is discretised on a uniform mesh with…Coupled modes and numerical heat transfer